• 米乐M6网址_手机app下载

    新sa真人
    新sa真人
    新sa真人
    新sa真人
    新sa真人

    米乐M6网址【kok推荐】有最全的手机娱乐游戏且网址是唯一的官方网站,米乐M6网址平台是大型的国际娱乐游戏的NO.1,玩家可以在网页上登录注册,官网还提供app下载安装

    AHU (air handling unit)

    • Description
    • Inquiry

     

    AHU (air handling unit) covers vertical (air volume from 2000 ~ 60000m3 /h), horizontal (wind increased from 2000 ~ 60000m3/h), and ceiling-type (air volume from 1000 ~ 16000m3/h) three series of air-handling unit to meet customers’ need of cooling, heating, humidification, dehumidification and so on. It is widely applied in hotels, theaters, shopping malls, office buildings and a variety of places requires comfortable environment. It also can be used in electronics, chemical, medical, pharmaceutical, cigarettes, food, light engineering and other industrial buildings.

    Our AHU is under installarion in North America

    AHU (air handling unit) (5)

    AHU (air handling unit) (5)

    The characteristics of air-handling units

    Frame structure: aluminum framework structure is adopted, which is made of high-strength aluminum alloy. Each corner of the framework is made of special castings, allowing the section bar to plug into it. This structure has the following features:

    A: good performance in mechanical strength, light in weight, corrosion resistance, beautiful shape and accurate size.

    B: flexible assemblage, very convenient to install, remove and maintenance. Also, it has longer service life than steel structure.

    Panel structure: A: the panel is formed by two layers of colored steel plates. Filler between the layers is high-density polyurethane or polystyrene, which has a better performance in thermal isolation than other materials like glass wool. No thermal bridge will be produced while working in all weather or working conditions.

    B: panels are fixed in a special way, with sealing material to strengthen its thermal and air resistance. This structure has the best performance in thermal isolation, noise reduction and intensity, so it can be used in places require high quality of air.

    Fan, electrical motor: A: unit adopts centrifugal fan with both air inlet. The fan runs smoothly in the rigorous static and dynamic balance test.

    B: With ball bearings sealed, and functions of pre-lubricating, self-aligning, self-locking, automatic thrust, etc., the fan is maintenance-free in normal use.

    C: fans of a small model unit are driven directly by external sub-motor, no belt, and easy to maintain.

    Filter: unit filter is coarse plate. Filter material is cleanable convex Nylon net.

    Cooler: the selected parameters of surface air cooler are designed by CAD/coi1 software. A standard cooler normally has copper pipes of φ6. It is tightened by an overall rise up of brass strung by corrugated aluminum fin tubes. Staggered copper pipes have good heat transfer performance, low airflow resistance and superior corrosion resistance, ensuring the cooler has a higher heat transfer coefficient and a longer life.

     

    Note: 1. method to decide units type: facing the air inlet (i.e., along with air-flow direction), if the inlet and outlet tube is on the left, it is left form, if on the right, it is right form.

    2. According to client’s specific need, our company can configure additional electrical protection devices and air quantity speed regulation (including variable frequency controller and thyristor controller).

    3. Structures corresponding with the external air duct: as shown below, A is the default choice.

    Air handling unit performance (Table I ~ Table VI)

    1. Air-conditioning working condition means that the dry bulb temperature of intake air is 27℃, wet bulb 19.5℃ while cooling, and dry bulb 21℃ while heating.

    2. Fresh air working conditions (l00% fresh air) means when cooling, dry bulb temperature of intake air is 350℃, wet bulb temperature 28℃, dry bulb temperature of intake air -5℃ while heating.

    3. Cold water temperature: supply water is 7℃, back water is 12℃. Hot water supply temperature is 60℃.

    4. The motor power values from table I to tableVI correspond with its different residual pressure. The residual pressure is flexible, which can be decided by our customers according to needs.

    5. The noise values from table I to table VI are tested in the muffling section 1m (GB/T9068) away from each surface of the units.

    6. Cooling capacity ratioαchanges with the refrigerants temperature ( i.e. tw) as follows.

    7. Cooling capacity ratio αchanges with the wet bulb temperature of intake air( i.e. ts) as follows.

    Air-handling unit installation instructions
    ● In units neighboring, especially the side with maintenance door and external water pipe, enough space should be reserved for filter extraction and maintenance.
    ● A horizontal base is indispensable. Any slant base will affect normal water drainage of water pond and working fan’s dynamic balance.
    ● Air is sucked in by unit. The heating hot water temperature must not be higher than 65℃. The water must be cleaned (soft water). A water filter is needed if necessary.
    ● The condensate pipe of units must be equipped with steam trap. The height of it can be measured through residual pressure + height of 100nn water (following picture is the specific requirement), and a smooth condensate pipe and drainage slope be higher than 0.005 must be assured.
    ● Weight of air pipes and water pipes connected to the units must be born by a hanger or support column not the unit itself.
    ● The electric motor power supply must have protection when the power lacks phase or is overloaded. Voltage reduction should be started in a motor with power more than 11Kw. Units power supply is 380V, 50Hz.
    ● After the installation, before switching on the power, please rotate the leaves of fan with hand to check if they are in good condition. Don’t forget to check the voltage to see if it is the right one, without missing phase or is an imbalance triphase. After power on, first of all, switch on the electric power to check if the fan rotates in the right direction, if not, please change the phase sequence. Only without exceptions can the unit be put to use. No empty running for the unit.
    ● Before the unit starts, air inlet and outlet valve should be half open. After the start, please adjust the opening space of air valve to make sure that the motor runs within rated current.
    ● Air filter should be cleaned regularly. During non-use period in winter, measures of freezing-proof are necessary, or empty the coil to prevent it from frost cracking.
    ● After two years of operation, a comprehensive maintenance is necessary for the unit, including cleaning dirt on heat exchanger fins and scale in water pipes.
    ● A professional technician is needed if the unit breaks down.
    Ordering Guide
    ◆ Please be sure of the size, model, cool and heat quantity and left/right form in selecting air handling unit.
    ◆ Electrical controller is not part of the unit. However, the electric protector and air quantity speed regulation (including variable frequency controller and thyristor controller) is addable according to clients’ needs. Neither is inlet and outlet air quantity valve part of the unit. Please inform us before ordering if you need it.
    ◆ Our products are not limited to our routine units. According to clients’ special needs, unit can be equipped with additional electrical (auxiliary) heater, humidifier (steam humidifier, wet membrane humidifier, high-pressure spray humidifier and electrode humidifier), silencerand so on.
    Our company follows the principle of constantly improving our products. Please kindly excuse us if we do not inform you in time about changes or improvement of product performance, specifications, and materials, and keep in touch with us to obtain the latest information.

    Contact Us






    小泽玛利亚 樱井步 苍井空 石黑京香 桃谷绘里香 白咲舞 川岛和津实 黑泽爱 樱井步 小泽爱丽丝 七濑茱莉亚 樱朱音 原千寻 若菜奈央 稻森丽奈 尾野真知子 友田真希 花野真衣 雪本芽衣 雨宫真贵 冲田杏梨 高阪保奈美 霞理沙 泽井芽衣 北野望 桃谷绘理香 橋本凉 波多野结衣 仁科百华 柚木提娜 长泽梓 大沢佑香 天海翼 前田香织 前田香织 二宫沙树 铃木里美 希崎杰西卡 麻仓优 麻美由真 原更沙 葵实野理 上原瑞穂 福山沙也加 铃木麻奈美 西野翔 神谷姬 希志爱野 琴乃 希崎杰西卡 秋元里奈 原干惠 杏树纱奈 佐藤遥希 Sato Haruki 前田香织 二宫沙树 仁科百华 樱木凛 秋元里奈 小泽爱丽丝 原纱央莉 浅井舞香 音羽雷恩 天海丽 大泽佑香 百合野もも 里美尤里娅 铃原爱蜜莉 美竹铃 吉沢明步 吉泽明步 早川濑里奈 美竹凉子 松岛枫 佐佐木希 樱井梨花 立花美凉 小泉彩 里美尤里娅 铃原爱蜜莉 美竹铃 松岛枫 佐佐木希 朝美穗香 上原结衣 纹舞兰

    米乐m6网址